Filter
Top Products
26
1
Press and hold the button for more than 2
seconds to set the preferred setting mode (see
page 25).
2
Select “BEEP” if not shown on the display.
3
Turning on/off the key-touch tone
This function is ONLY FOR KD-SX838R.
You can deactivate the key-touch tone if you do not want to make it beep when you press a
button. (When shipped from the factory, the key-touch tone is activated.)
SEL
You can select the level display according to your preference.
1. Press the SEL button for more than 2 seconds to set the preferred setting mode.
2. Select “LEVEL” with the ¢
or 4 button.
3. Select the desired mode with the + or - button.
Volume level (OFF) Ô Signal level (AUDIO) (see page 25)
Selecting the level display (only for KD-SX838R/S737R)
SSM
To deactivate the key-touch tone (OFF).
To activate the key-touch tone (ON).
123