JVC KD-S52 CD Player User Manual


 
19
ENGLISH
Indications Selectable settings, [reference page]
EXT IN*
5
External input
CHANGER : [Initial]; To use a JVC CD changer, an Apple iPod or
a JVC D. player, [21].
EXT IN : To use another external component (other than
SIRIUS DLP), [21].
L/O MODE
External output
When connecting amplifiers and/or subwoofer (see the Installation/
Connection Manual for details), set this correctly.
FRONT : [Initial]; Select if the both LINE OUT terminals are
used for connecting the amplifiers.
WOOFER : Select if the FRONT LINE OUT terminals are used
for connecting the subwoofer.
AUX ADJ
Auxiliary input level
adjustment
A.ADJ 00 – A.ADJ 05: Adjust the auxiliary input level
accordingly, to avoid the sudden increase of the
output level when changing the source from external
component connected to the AUX input jack on the
control panel.
[Initial: A.ADJ 00]
TAG DISP
Tag display
TAG ON : [Initial]; Shows the ID3 tag while playing MP3/WMA
tracks, [14].
TAG OFF : Cancels.
AMP GAIN
Amplifier gain control
You can change the maximum volume level of this unit.
LOW PWR : VOL 00 – VOL 30 (Select this if the maximum power
of the speaker is less than 50 W to avoid damaging the
speaker.)
HIGH PWR : [Initial]; VOL 00 – VOL 50
AREA
Tuner channel interval
AREA EU : Select this when using the unit in an area other than
North and South America. (FM: 50 kHz—manual
tuning, 100 kHz—auto search; AM: 9 kHz)
AREA US : [Initial]; Select this when using the unit in North or
South America. (FM: 200 kHz; AM: 10 kHz)
*
5
Displayed only when one of the following sources is selected—FM, AM, or CD, or AUX IN.
EN18-23_KD-S52[J]f.indd 19EN18-23_KD-S52[J]f.indd 19 7/15/05 12:30:46 PM7/15/05 12:30:46 PM