JVC KD-LH3105 CD Player User Manual


 
23
ENGLISH
Press ¢ briefly while
playing, to skip ahead to
the beginning of the next
file.
Each time you press the
button consecutively, the
beginning of the next files
is located and played back.
Press 4 briefly while playing, to skip back
to the beginning of the current file.
Each time you press the button consecutively,
the beginning of the previous files is located and
played back.
Press and hold ¢
while playing an MP3 disc,
to fast-forward the file.
Locating a file or a particular
portion on an MP3 disc
For “MP3 playback/search order” see page 21.
To fast-forward or reverse the file
Note:
During this operation, you can only hear intermittent
sounds. (The elapsed playing time also changes
intermittently on the display.)
To skip to the next or previous files
To go to a particular file quickly within the
current folder
1 Press M (MODE) while playing an MP3 disc.
“Mode” appears on the display.
The next-step operation buttons
start flashing.
CONTINUED ON THE NEXT PAGE
Press and hold 4 while playing an MP3
disc, to reverse the file.
What is ImageLink?
When an MP3 folder includes an image <jml>
file edited by Image Converter (supplied in the
CD-ROM), you can show the image on the
display while the files in the folder are played
back.
While reading an image <jml> file, no sounds
come out (the preset image of a coffee cup is
shown on the display during this period).
If there are more than one <jml> file in a
folder, a <jml> file with younger playback
order number will be shown on the display
(in the above example, “Photo2.jml” will be
used for Album 2).
To activate ImageLink, follow the procedure
below:
See also “Changing the general settings
(PSM)” on page 39.
1 Press and hold SEL (select) for more than
2 seconds so that one of the PSM items
appears on the display.
2 Press number button 1 to select “MOVIE”—
Movie category of the PSM settings.
The “Graphics” setting screen appears on
the display.
3 Turn the control dial to select “ImageLink.”
4 Press SEL (select) to finish the setting.
ImageLink starts functioning when the next
folder starts playing.
Note:
ImageLink will not work in the following cases:
If no <jml> file is included in an MP3 folder.
If Intro Scan is activated,
If the source is changed to any other than “CD,” or
If you turn off then on the unit while the preset
image of a coffee cup is shown on the display.
Album 1
(Folder 1)
Music001.mp3
Music002.mp3
Music003.mp3
Photo1.jml
Photo1.jml
Photo2.jml
Music004.mp3
Music005.mp3
Music006.mp3
Photo2.jml
Photo3.jml
Display window
Display window
Album 2
(Folder 2)
EN22-27_KD-LH3105[U]f.p65 2/18/03, 4:37 PM23