Filter
Top Products
ENGLISH
39REFERENCES
Symptoms Remedies/Causes
USB playback
• Noise is generated. • The track played back is not a playable file format.
Skip to another file.
• Do not add the extension code <.mp3> or <.wma>
to non-MP3 or WMA tracks.
• “READING” keeps flashing on the display. • Readout time varies depending on the USB device.
• Do not use too many hierarchy or folders.
• Turn off the power then on again.
• Do not pull out or connect the USB device repeatedly
while “READING” is displayed on the display.
• “NO FILE” appears on the display. Check whether the selected folder, the connected USB
device, or the iPod/iPhone contains a playable file.
• Tracks/folders are not played back in the
order you have intended them to play.
The playback order is determined by the file name.
Folders with numbers on the initial of their names
are sorted in numerical order. However, folders with
no numbers on the initial of their names are sorted
according to the file system of the USB device.
• “CANNOT PLAY” appears on the display.
• “NO USB” appears on the display.
• The unit cannot detect the USB device.
• Check whether the connected USB device or the iPod is
compatible with this unit.
• The USB device is not connected properly. Connect the
USB device again.
• “NOT SUPPORT” appears on the display. Check whether the track is a playable file format.
• The correct characters are not displayed
(e.g. album name).
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
• While playing a track, sound is sometimes
interrupted.
The tracks have not been properly copied into the USB
device. Copy tracks again into the USB device, and try
again.
KD-HDR50[J]8.indb 39KD-HDR50[J]8.indb 39 08.11.28 10:22:51 AM08.11.28 10:22:51 AM