JVC KD-HDR50 CD Player User Manual


 
ENGLISH
30
Category Menu items Selectable settings, [reference page]
COLOR
COLOR 01
— COLOR 29,
USER
Select one of the preset or user color for display and button (except EQ/
/0) illumination.
(See also page 32 for USER color setting.)
MENU
COLOR
MENU COLOR
Menu color
OFF:
ON:
Cancels.
Changes the display and button (except EQ/
/0)
illumination during menu, list search and playback mode
operations.
RING COLOR
RING COLOR *
7
Ring color
OFF:
ON:
Cancels.
When a call comes in, the display will flash in blue.
The display will change to the original color when you
answer the call or the incoming call stops.
When the unit receive a text message, the display only
illuminate in blue.
AUDIO
FADER*
8
Fader
FADER R12
— FADER F12:
Adjust the front and rear speaker output balance.
[Initial: 00]
BALANCE *
9
Balance
BALANCE L12
— BALANCE R12:
Adjust the left and right speaker output balance.
[Initial: 00]
VOL ADJUST
Volume adjust
VOL ADJ –10
— VOL ADJ +10:
[Initial: VOL ADJ 00]
Preset the volume adjustment level of each source (except
FM), compared to the FM volume level. The volume level
will automatically increase or decrease when you change
the source.
Before making an adjustment, select the source you want
to adjust.
“VOL ADJ FIX” appears on the display if “FM”, “BT PHONE“,
or “BT AUDIO“ is selected as the source.
SUB.W FREQ
Subwoofer cutoff
frequency
LOW:
MID:
HIGH:
Frequencies lower than 72 Hz are sent to the subwoofer.
Frequencies lower than 111 Hz are sent to the subwoofer.
Frequencies lower than 157 Hz are sent to the subwoofer.
*
7
Displayed only when Bluetooth adapter, KS-BTA200 is connected.
*
8
If you are using a two-speaker system, set the fader level to “00.”
*
9
This adjustment will not aff ect the subwoofer output.
KD-HDR50[J]8.indb 30KD-HDR50[J]8.indb 30 08.11.28 10:22:44 AM08.11.28 10:22:44 AM