JVC KD-DV5101 CD Player User Manual


 
50
ENGLISH
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms Causes Remedies
General
Sound cannot be heard
from the speakers.
The volume level is set to the
minimum level.
Adjust it to the optimum
level.
Connections are incorrect. Check the cords and
connections.
The receiver does not work
at all.
The built-in microcomputer
may have functioned
incorrectly due to noise, etc.
Reset the receiver
(see page 2).
FM/AM
SSM automatic presetting
does not work.
Signals are too weak. Store stations manually.
Static noise while listening
to the radio.
The aerial is not connected
firmly.
Connect the aerial firmly.
Disc playback
Disc cannot be played
back.
Disc is inserted upside down. Insert the disc correctly.
CD-R/CD-RW or DVD-R/
DVD-RW cannot be played
back.
Tracks on the CD-R/
CD-RW or DVD-R/
DVD-RW cannot be
skipped.
CD-R/CD-RW or DVD-R/
DVD-RW is not finalized.
Insert a finalized CD-R/
CD-RW or DVD-R/
DVD-RW.
Finalize the
CD-R/CD-RW
or DVD-R/DVD-RW
with
the component which you
used for recording.
Disc cannot be recognized. The DVD/CD player may
have functioned incorrectly.
Eject the disc forcibly
(see page 2).
“NO DISC” appears on the
display.
Disc is inserted incorrectly. Insert the disc correctly.
Sound and picture are
sometimes interrupted or
distorted.
You are driving on rough
roads.
Stop playback while driving
on rough roads.
Disc is scratched. Change the disc.
Connections are incorrect. Check the cords and
connections.
EN44-53_KD-DV5101[E]1.indd 50EN44-53_KD-DV5101[E]1.indd 50 12/20/04 3:07:57 PM12/20/04 3:07:57 PM