JVC KD-DV5101 CD Player User Manual


 
18
ENGLISH
Before performing any operations, make
sure the following....
Turn on the monitor for playing a DVD or
VCD. If you turn on the monitor, you can also
control the audio CD, CD Text, and MP3/
WMA playback by referring to the monitor
screen. (See pages 27 and 28.)
For DVD playback, you can change the Setup
Menu setting to your preference. (See pages
29 – 31.)
The operations explained on pages 20 – 31 are
using the remote controller.
When you want to operate the DVD/CD
player using the buttons on the control panel,
see “Other disc operations” on pages 32 – 35.
If “
” appears on the monitor when
pressing a button, the receiver cannot accept
an operation you have tried to do.
In some cases, without showing “
,”
operations will not be accepted.
Microsoft and Windows Media are either
registered trademarks or trademarks of
Microsoft Corporation in the United States
and/or other countries.
The disc type is automatically detected, and
playback starts automatically (for DVD:
automatic start depends on its internal program).
If the current disc is an audio CD, CD Text,
MP3/WMA, or VCD without PBC, all tracks
will be played repeatedly until you change the
source or eject the disc.
If a title list or disc menu appears while
playing a DVD or VCD with PBC, see “Disc
menu operations” on page 23.
The following marks are used to indicate
the playable discs....
DVD Video Video CD with PBC
only
Video CD with/without
PBC
Audio CD/
CD Text
MP3/WMA disc All discs listed here
Disc operations
Playing a disc in the receiver
EN18-31_KD-DV5101[E]1.indd 18EN18-31_KD-DV5101[E]1.indd 18 12/20/04 9:43:35 AM12/20/04 9:43:35 AM