JVC KD-ABT22 CD Player User Manual


 
ENGLISH
46
Symptoms Remedies/Causes
Bluetooth ®
The unit cannot be detected by the
Bluetooth device.
Search from the Bluetooth device again.
Reset the unit. When “Open...“ appears on the display,
search from the Bluetooth device again.
The unit does not make pairing with the
Bluetooth device.
Enter the same PIN code for both the unit and target
device.
Phone sound quality is poor. Reduce the distance between the unit and the
Bluetooth cellular phone.
Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped during
playback of a Bluetooth audio player.
Reduce the distance between the unit and the
Bluetooth audio player.
Disconnect the device connected for “Phone.”
Turn off, then turn on the unit.
When the sound is not yet restored: Connect the player
again.
The connected audio player cannot be
controlled.
Check whether the connected audio player supports
AVRCP (Audio Video Remote Control Profile).
(Operations depend on the connected audio player.)
Disconnect and connect the Bluetooth player again.
The unit does not response when you tried
to copy the phone book to the unit.
You may have tried to copy the same entries (as stored)
to the unit. Press number button 3 to exit.
HD Radio reception
Sound quality changes when receiving
HD Radio stations.
Fix the reception mode either to “Digital” or “Analog”
(see page 20).
No sound can be heard. “Analog” is selected when receiving all digital
broadcast of HD Radio station. Select “Digital” or
“Auto” (see page 20).
“Digital” is selected when receiving weak digital
signals or receiving conventional radio broadcast.
Select “Analog” or “Auto” (see page 20).
“Reset 08” appears on the display. Reconnect this unit and the HD Radio tuner box correctly,
then reset the unit.
EN46-51_KD-ABT22[J]f.indd 46EN46-51_KD-ABT22[J]f.indd 46 1/2/08 10:23:15 AM1/2/08 10:23:15 AM