JVC KD-A805 CD Player User Manual


 
ENGLISH
45REFERENCES
Continued on the next page
Symptoms Remedies/Causes
USB device
“Not Support” appears on the display and
track skips.
Check whether the track is a playable file format.
Correct characters are not displayed (e.g.
album name).
This unit can only display letters (capital: A – Z,
small: a – z), numbers, and a limited number of symbols
(see page 37).
While playing a track, sound is sometimes
interrupted.
The tracks have not been properly copied into the USB
device. Copy tracks again into the USB device, and try
again.
Bluetooth
The unit does not detect the Bluetooth
device.
Search from the Bluetooth device again.
Reset the unit. When “Wait Pair” appears on the
display, search from the Bluetooth device again.
The unit does not make pairing with the
Bluetooth device.
Enter the same PIN code for both the unit and target
device.
Echo or noise occurs. Adjust the microphone unit’s position.
Phone sound quality is poor. Reduce the distance between the unit and the
Bluetooth cellular phone.
Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped during
playback of a Bluetooth audio player.
Reduce the distance between the unit and the
Bluetooth audio player.
Disconnect the device connected for Bluetooth Phone.
Turn off, then turn on the unit.
Connect the player again, when the sound is not yet
restored.
The connected audio player cannot be
controlled.
Check whether the connected audio player supports
AVRCP (Audio/Video Remote Control Profile).
(Operations depend on the connected audio player.)
Disconnect and connect the Bluetooth player again.
The unit does not response when you tried
to copy the phonebook to the unit.
You may have tried to copy the same entries (as stored)
to the unit. Press DISP or BACK to exit.
EN38-45_KD-A805[J]f.indd 45EN38-45_KD-A805[J]f.indd 45 2/10/09 4:20:58 PM2/10/09 4:20:58 PM