JVC KD-A805 CD Player User Manual


 
ENGLISH
43REFERENCES
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service center.
Symptoms Remedies/Causes
General
Sound cannot be heard from the speakers. Adjust the volume to the optimum level.
Check the cords and connections.
The unit does not work at all. Reset the unit (see page 3).
“Connect Error” appears on the display. Remove the control panel, wipe the connector, then
attach it again (see page 3).
FM/AM
SSM automatic presetting does not work. Store stations manually.
Static noise while listening to the radio. Connect the antenna firmly.
“AM” cannot be selected. Check the <Source Select>
= <AM Source> setting
(see page 33).
Disc playback
Disc cannot be played back. Insert the disc correctly.
CD-R/CD-RW cannot be played back.
Tracks on the CD-R/CD-RW cannot be
skipped.
Insert a finalized CD-R/CD-RW.
Finalize the CD-R/CD-RW with the component which
you used for recording.
Disc can neither be played back nor ejected.
“No Eject” appears on the display.
Unlock the disc (see page 10).
Eject the disc forcibly (see page 3).
Disc sound is sometimes interrupted. • Stop playback while driving on rough roads.
Change the disc.
Check the cords and connections.
Disc cannot be recognized (“No Disc,”
“CD Loading Error,” or “Eject Error” flashes).
Eject the disc forcibly (see page 3).
“Please Eject” appears on the display. This occurs sometimes due to over-heating. Eject the disc
or change to another playback source.
MP3/WMA playback
Disc cannot be played back. Use a disc with MP3/WMA tracks recorded in a format
compliant with ISO 9660 Level 1, Level 2, Romeo, or
Joliet.
Add the extension code <.mp3> or <.wma> to the
file names.
Noise is generated. Skip to another track or change the disc. (Do not add the
extension code <.mp3> or <.wma> to non-MP3 or
WMA tracks.)
Continued on the next page
EN38-45_KD-A805[J]f.indd 43EN38-45_KD-A805[J]f.indd 43 2/4/09 10:20:11 AM2/4/09 10:20:11 AM