Filter
Top Products
ENGLISH
44
Symptoms Remedies/Causes
MP3/WMA playback
• A longer readout time is required
(“Reading” keeps flashing on the
display).
Do not use too many hierarchical levels and folders.
• Tracks do not play back in the order
you have intended them to play.
The playback order is determined by the file name. Folder with
numbers on the initial as their names are sorted in numerical
order. However, folder with no numbers on the initial of their
names are sorted according to the file system of the CD.
• The elapsed playing time is not
correct.
This sometimes occurs during playback. This is caused by how
the tracks are recorded on the disc (eg. variable bit rate).
• “Please Eject” appears on the display. Insert a disc that contains MP3/WMA tracks.
• “No File” appears on the display. Selected folder is an empty folder *
1
. Select another folder that
contains MP3/WMA tracks.
• “Not Support” appears on the display
and track skips.
Skip to the next track encoded in an appropriate format or to
the next non-copy-protected WMA track.
• Correct characters are not displayed
(e.g. album name).
This unit can only display letters (capital: A – Z, small: a – z),
numbers, and a limited number of symbols (see page 37).
USB device
• Noise is generated. The track played back is not an MP3/WMA/WAV track. Skip
to another file. (Do not add the extension code <.mp3>,
<.wma>, or <.wav> to non-MP3/WMA/WAV tracks.)
• “Reading” keeps flashing on the
display.
• Readout time varies depending on the USB device.
• Do not use too many hierarchy or folders.
• Turn off the power then on again.
• Do not pull out or connect the USB device repeatedly while
“Reading” is displayed on the display.
• “No File” appears on the display. Check whether the selected folder, the connected USB device,
or the iPod/iPhone contains a playable file.
• “Read Failed” appears on the display. The connected USB device is not working properly. Connect the
USB device again.
• Tracks/folders are not played back in
the order you have intended.
The playback order is determined by the file name. Folders
with numbers on the initial of their names are sorted in
numerical order. However, folders with no numbers on the
initial of their names are sorted according to the file system of
the USB device.
• “Cannot Play” appears on the display.
• “No USB” appears on the display.
• The unit cannot detect the USB device.
• Check whether the connected USB device or the iPod/iPhone
is compatible with this unit.
• The USB device is not connected properly. Connect the USB
device again.
*
1
Folder that is physically empty or folder that contains data but does not contain valid MP3/WMA track.
EN38-45_KD-A805[J]f.indd 44EN38-45_KD-A805[J]f.indd 44 2/12/09 5:23:29 PM2/12/09 5:23:29 PM