Filter
Top Products
25
ENGLISH
Setting the name of the external component
You can select the name of the external component which will be shown on the upper part of
the display when you press CD-CH/AUX. When shipped from the factory, the name of the
external component is set to “EXTRA.”
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select “AUX (auxiliary)” with
¢ or 4 .
3. Select the desired source name with the control dial.
The source name to be shown on the upper part of the display changes as follows:
EXTRA TV
VIDEO MD TAPE
Changing the AM/FM channel intervals
When this unit is shipped from the factory, the channel intervals are set to 10 kHz for AM and
200 kHz for FM (AREA US settings).
You will have to change the channel intervals when using this unit in an area other than North
America and South America.
• AREA EU: Select this when using this unit in an area other than North and South America.
(9 kHz for AM and 50 kHz (for manual tuning) / 100 kHz (for searching) for FM)
• AREA US: Select this when using this unit in North or South America. (10 kHz for AM and
200 kHz for FM)
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items
appears on the display.
2. If “AREA” does not appear, press ¢ or 4
until it appears.
3. Turn the control dial clockwise or counterclockwise to select the correct channel intervals.
EN20-27.KD-SX949/SX940[J]/F 98.12.2, 1:41 PM25