Filter
Top Products
10
ENGLISH
Scanning broadcast stations
When you press INT/SCAN (Intro/Scan for KD-SX949) or SCAN (Scan for KD-SX940) while
listening to the radio, station scanning starts. Each time a broadcast is tuned in, scanning
stops for about 5 seconds (“SCAN” flashes on the display), and you can check what program
is now being broadcast.
If you want to listen to that program, press the same button again to stop scanning.
Selecting FM reception sound
When an FM stereo broadcast is hard to receive:
Press MO/RND (Mono/Random) while listening to an FM stereo broadcast. The MO (Mono)
indicator lights up on the display.
The sound you hear becomes monaural but reception will be improved.
To restore the stereo effect, press the same button again.
When using this unit in an area other than North or South America:
You need to change the AM/FM channel intervals. See “Changing the AM/FM channel
intervals” on page 25.
Other convenient tuner functions
Lights up when receiving an FM broadcast in stereo.
MO/RND
MO/RND
INT/SCAN (for KD-SX949)
SCAN (for KD-SX940)
EN06-10.KD-SX949/SX940[J]/F 98.12.2, 1:37 PM10