Filter
Top Products
10
ENGLISH
RADIO OPERATIONS
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
Searching a station automatically:
Auto search
1
Select the band (FM1 – 3, AM).
1 Press SRC (source)
repeatedly to select the tuner.
2 Press and hold SRC for more
than 1 second.
The band indication on the
display starts flashing.
3 Within about 5 seconds (while
the band indication is
flashing), press SRC again.
Each time you press the
button, the band changes.
Last received station of the selected band is
tuned in.
3456 M21
D
SRC
DISP
ATT
SEL
T/P
MODE
Lights up when receiving an FM stereo broadcast
with sufficient signal strength.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Start searching a station.
When a station is received, searching stops.
To stop searching before a station is received,
press the same button you have pressed for
searching.
Press ¢ to search
stations of higher
frequencies.
Press 4 to search
stations of lower
frequencies.
FM1
FM2FM3
AM
Ex. When the band is FM
Program station (PS)
name (see page 14)
Programme type (PTY)
(see page 14)
SRC
EN10-14SH9101[E_EX]f.p65 03.2.27, 22:5010