JVC KD-S743R CD Player User Manual


 
5
ENGLISH
BASIC OPERATIONS
Turning on the power
1
Turn on the power.
Note on One-Touch Operation:
When you select a source in step
2
below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
To operate the tuner (FM or AM),
see pages 7 – 16.
To play a CD,
see pages 17 – 19.
3
Adjust the volume.
4
Adjust the sound as you want.
(See pages 20 and 21.)
To drop the volume in a moment
Press briefly while listening to any
source. ATT starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
To turn off the power
Press and hold for more than one second.
SEE YOU appears, then the unit turns off.
If you turn off the power while listening to a
CD, CD play will start from where playback has
been stopped previously, next time you turn on
the power.
CAUTION on Volume Setting:
CDs produce very little noise compared with other
sources. If the volume level is adjusted for the
tuner, for example, the speakers may be damaged
by the sudden increase in the output level.
Therefore, lower the volume before playing a CD
and adjust it as required during playback.
Only for KD-S73R and KD-S71R
This receiver is equipped with the steering
wheel remote control function.
If your car is equipped with the steering wheel
remote controller, you can operate this
receiver using the controller.
See the Installation/Connection Manual
(separate volume) for connection to utilize
this function.
Volume level indicator
Volume level appears.
To increase the volume
To decrease the volume
DISP
SSM
SCMMODE
7 9 10 12
RND
11
RPT
8
MO
TP/PTY
SEL
AM
CD
FM
13 2
FM
CD
AM
EN05-06_KD-S743R[E_EX]f.p65 11/18/02, 6:41 PM5