JVC KD-S743R CD Player User Manual


 
25
ENGLISH
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
General
Remedies
Adjust it to the optimum level.
Check the cords and
connections.
While holding SEL (select),
press for more than 2
seconds to reset the unit. (The
clock setting and preset stations
stored in memory are erased.)
(See page 2.)
Store stations manually.
Connect the antenna firmly.
Insert the CD correctly.
Insert a finalized CD-R/CD-RW.
Finalize the CD-R/CD-RW
with the component which
you used for recording.
Unlock the CD. (See page 19.)
While holding , press
0 for more than 2 seconds. Be
careful not to drop the CD when
it is ejected.
Stop playback while driving on
rough roads.
Change the CD.
Check the cords and
connections.
Insert a CD into the loading slot.
Insert the CD correctly.
Causes
The volume level is set to the
minimum level.
Connections are incorrect.
The built-in microcomputer
may have functioned
incorrectly due to noise, etc.
Signals are too weak.
The antenna is not connected
firmly.
CD is inserted upside down.
CD-R/CD-RW is not finalized.
CD is locked.
The CD player may function
incorrectly.
You are driving on rough
roads.
CD is scratched.
Connections are incorrect.
No CD in the loading slot.
CD is inserted incorrectly.
FM/AM
Symptoms
Sound cannot be heard
from the speakers.
This unit does not work at
all.
SSM (Strong-station
Sequential Memory)
automatic preset does not
work.
Static noise while listening
to the radio.
CD automatically ejects.
CD-R/CD-RW cannot be
played back.
Tracks on the CD-R/CD-RW
cannot be skipped.
CD can be neither played
back nor ejected.
CD sound is sometimes
interrupted.
•“NO DISC appears on the
display.
CD Playback
EN25-27_KD-S743R[E_EX]f.p65 11/18/02, 6:40 PM25