JVC KD-G120 CD Player User Manual


 
ENGLISH
12
Symptoms Remedies/Causes
General
Sound cannot be heard from the
speakers.
Adjust the volume to the optimum level.
Check the cords and connections.
This unit does not work at all. Reset the unit (see page 2).
FM/AM
SSM automatic presetting does not
work.
Store stations manually.
Static noise while listening to the
radio.
Connect the antenna firmly.
Disc playback
Disc automatically ejects. Insert the disc correctly.
CD-R/CD-RW cannot be played
back.
Tracks on the CD-R/CD-RW cannot
be skipped.
Insert a finalized CD-R/CD-RW.
Finalize the CD-R/CD-RW with the component
which you used for recording.
Disc can be neither played back nor
ejected.
Unlock the disc (see page 7).
Eject the disc forcibly (see page 2).
Disc sound is sometimes interrupted. Stop playback while driving on rough roads.
Change the disc.
Check the cords and connections.
“NO DISC” appears on the display. Insert a playable disc into the loading slot.
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Ejecting a disc
If the ejected disc is not removed within
15 seconds, the disc is automatically inserted
again into the loading slot to protect it from
dust. (Disc will not play this time.)
General settings—PSM
If you change the “AMP GAIN” setting from
“HIGH PWR” to “LOW PWR” while the
volume level is set higher than “VOL 30,” the
unit automatically changes the volume level to
“VOL 30.”
EN10-13_KD-G125_126[UN]f.indd 12EN10-13_KD-G125_126[UN]f.indd 12 10/4/05 11:56:00 AM10/4/05 11:56:00 AM