Filter
Top Products
20
2
Press CLOCK/TIMER again.
“ON TIME” appears for 1 second, then the
unit enters on-time setting mode.
3
Set the on-time you want
the unit to turn on.
1) Press ¢/¡ or 4/1 to set the
hour, then SET/RESUME.
2) Press ¢/¡ or 4/1 to set the
minute, then SET/RESUME.
“OFF TIME” appears for 1 second,
then the unit enters off-time setting
mode.
4
Set the off-time you want
the unit to turn off (on
standby).
1) Press ¢/¡ or 4/1 to set
the hour, then SET/RESUME.
2) Press ¢/¡ or 4/1 to set the
minute, then SET/RESUME.
The unit enters source selecting mode.
5
Press ¢/¡ or 4/1
to select the source to play,
then SET/RESUME.
• Each time you press ¢/¡ or
4/1, the source changes as
follows:
TUNER FM : tunes in to a specified preset FM station.
= go to step
6
.
TUNER AM : tunes in to a specified preset AM station.
= go to step
6
.
CD* : plays a disc on a specified disc tray from
the first track.
= go to step
6
.
AUX IN : plays an external source.
= go to step
7
.
* If the selected disc tray is empty, the next disc tray is
selected. If all the disc trays are empty, the last tuned
FM or AM station is selected.
Using the Timers
There are two timers available—Daily Timer and Sleep
Timer.
Before using the timers, you need to set the clock built in the
unit. (See “Setting the Clock” on page 10.)
Using Daily Timer
With Daily Timer, you can wake to your favorite music or
radio program. You can set the timer whether the unit is on or
off.
How Daily Timer actually works
The unit automatically turns on, set the volume level to the
preset level, and starts playing the specified source when the
on-time comes (the indicator flashes while the timer is
operating). Then, when the off-time comes, the unit
automatically turns off (on standby).
Daily Timer works everyday unless you cancel it.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step
1
again.
• If you have made a mistake while setting timer, press
CANCEL. (However, this does not always work. If
CANCEL does not work, press CLOCK/TIMER repeatedly
and start from step
1
again.)
Before you start...
• When using the tuner as the source to play:
— Make sure to preset a station you want to play. (See
page 13.)
• When using a disc as the source to play:
— Make sure there is a disc you want to play on the
currently selected disc number tray.
• When using the external component as the source to
play:
— Set the timer equipped with the external component
at the same time.
On the remote control ONLY:
1
Press CLOCK/TIMER
repeatedly until “DAILY”
appears on the display.
The indicator lights up and the DAILY
(daily timer) indicator starts flashing on the display.
• Each time you press the button, the clock/timer setting
modes change as follows:
CD
TUNER FM
TUNER AM
AUX IN
DAILY
CLOCK
ON TIME
(Daily Timer)
(See page 10.)
Canceled
Continued
MXGC5[J]_20-24.p65 05.2.2, 10:40 AM20