Filter
Top Products
8
Continued
Connecting Other Equipment
You can connect audio equipment—used only as a playback
device.
• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all
connections are complete.
To connect audio equipment
For playing the other equipment through this unit,
connect between the audio output jack on the other
equipment and AUX jack on the front of the unit by using a
stereo mini plug cord (not supplied).
If the audio output on the other equipment is not
stereo mini plug type
Use a plug adapter to convert the stereo mini plug to the
corresponding plug of the audio output.
NOW you are ready to plug in the unit and
other connected equipment.
Canceling the Display Demonstration
When connecting the AC power cord into a wall outlet, the
unit automatically starts the display demonstration.
On the unit ONLY:
To cancel the display demonstration, press
DEMO while the display demonstration is
shown on the display.
When you press other buttons
The display demonstration stops temporarily. It will start
automatically again (if no operation is done for 2 minutes) until you
cancel it.
To start the display demonstration manually
Press and hold DEMO again for more than 2
seconds.
Saving the Power Consumption while on
Standby—ECO mode
You can save the power consumption while the unit is turned
off (on standby).
On the unit ONLY:
To activate the ECO mode, press ECO while the
unit is turned off (on standby).
“ECO MODE” appears on the display illumination
(including the display demonstration) disappears.
To deactivate the ECO mode, press ECO again.
The display illumination appears.
About ECO mode
While ECO mode is activated, the display demonstration is canceled
temporarily.
To audio output
Audio equipment
Stereo mini plug cord (not supplied)
MXGC5[J]_01-09.p65 05.2.2, 10:40 AM8