Filter
Top Products
Advanced operations
25
7 For MP3:
During playback or while stopped
For JPEG:
While stopped
1 Press Cursor 3/2/Y/5 to select the
desired group/track/file.
• For MP3, playback starts from the selected track.
• For JPEG, proceed to perform the following operation.
2 Press 3 (play button) or ENTER.
• Track playback/slide-show starts from the selected track/
file.
• When you press ENTER for JPEG, only the selected file is
played back.
To skip the file during playback
Press x/4 or Cursor 5/Y.
NOTE
• You can also check playback information on the display window.
(See page 17.)
• Some group, track and file names may not be displayed correctly
depending on recording conditions.
• The order of groups, tracks and files may be displayed differently
from the order displayed on your personal computer.
When Resume Playback is set to “ON”
(see page 33) and you stop playback by the
following operations, the position where
playback has been stopped is stored. (“RESUME” appears on the
display window.)
• Turning off the power (see page 13)
• Pressing 7 once
• Changing the source (see page 14)
To start playback from the stored position
(“RESUME” disappears.)
• Press 3 (play button) on the remote control or the center unit.
• Select DVD as the source again if you changed the source.
To clear the stored position
Press 7 again or open the disc tray.
7 During playback of a disc containing multi-view angles
When using the ANGLE button:
1 Press ANGLE.
Example:
The first view angle is selected out of 3 view angles recorded.
2 Press ANGLE repeatedly or Cursor Y/
5 to select the desired view angle.
When using the on-screen bar:
1 Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2 Press Cursor 3/2 to highlight .
3 Press ENTER.
4 Press Cursor Y/5 to select the desired
view angle.
5 Press ENTER.
6 Press ON SCREEN.
The on-screen bar disappears.
Resume Playback
Selecting a view angle
See page 20 for button locations.
TH-S1[UXUG]-1.book Page 25 Wednesday, July 21, 2004 10:29 AM