Filter
Top Products
– 26 –
To stop playback for a moment
Press CD # / 8.
To resume play, press CD # / 8 again.
To locate a particular point in a track during play
On the unit:
Push the joy control upward (¡
) or downward
(1
).
• Upward (¡
): Fast-forwards the tracks.
• Downward (1
) : Fast-reverses the tacks.
On the remote control:
Press and hold ¢ or 4.
• ¢ : Fast-forwards the tracks.
• 4 : Fast-reverses the tracks.
To go to another track
On the unit:
Push repeatedly (or hold) the joy control rightward
(¢
) or leftward (4 ).
• Rightward (¢
) : Skips to the beginning of the next
or succeeding tracks.
• Leftward (4
): Goes back to the beginning of the
current or previous tracks.
On the remote control:
Press ¢ or 4 repeatedly.
• ¢ :Skips to the beginning of the next or succeeding
tracks.
• 4 :Goes back to the beginning of the current or
previous tracks.
To go to another track directly using the number
buttons
Pressing the number button(s) allows you to start playing
the track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 32, press +10, +10, +10, then 2.
Programing the Playing Order of the Tracks
— Program Play
You can arrange the order in which the tracks play before
you start playing. You can program up to 32 tracks.
1
Load CDs.
• If the current playing source is not the CD player,
press CD # / 8, then 7 before going to the next step.
Step No.
2
Press PLAY/REC MODE (or PLAY MODE on the
remote control) so that “ CD PROGRAM” appears
in the main display.
The PRGM indicator also lights.
• Each time you press the button, play mode changes
as follows:
3
Press one of the disc number buttons (CD 1, CD 2,
and CD 3) to select the disc number you want to
play.
• When using the buttons on the unit, you can use the
joy control to select the CD number by pushing it
upward (¡
) or downward (1 ).
4
Select the track from the disc selected in the above
step.
On the unit:
Push the joy control rightward (¢
) or leftward
(4
) to select the track number, then press SET.
On the remote control:
Press the number buttons.
• For how to use the number buttons, see “To go to
another track directly using the number buttons” to
the left.
5
Program other tracks you want.
• To program tracks from the same disc, repeat step 4.
• To program tracks from a different disc, repeat steps
3 and 4.
6
Press CD # / 8.
The tracks are played in the order you have programed.
To stop during play, press 7.
To exit from Program play mode, press PLAY/REC
MODE (or PLAY MODE on the remote control) once or
twice, before or after play, so that the unit enters another
playback mode (Random play or Continuous play mode).
Ex. Disc No. 1 is selected
Ex. Track No. 5 is selected
Disc No. and Track No.
Continued
Program play
(CD PROGRAM)
Random play
(CD RANDOM)
Continuous play
(CD CONT.)
EN24-27.CA-MXS5RMD[B]/f 99.9.14, 1:53 AM26