Filter
Top Products
6
Introduction English
This product is compatible with PAL and NTSC
color systems.
In standby mode, select PAL or NTSC to match
your TV.
If the VIDEO OUT SELECT switch is switched
over when the power is on, turn off the power, and
then turn it on again.
• Before playing back a disc, it is also required to
select the correct MONITOR TYPE in the
PICTURE menu according to the aspect ratio of
your TV ( page 38).
NOTE
• If you play back an NTSC disc with this setting set
to "PAL", you can watch the playback pictures (the
disc will be reproduced using "PAL 60" format), but
the TV screen may rolls over upward and down-
ward rapidly.
NOTE
• If you play back a PAL disc with this setting set to
"NTSC", you can watch the playback pictures, but
the following symptoms may occur:
• The items on the disc menu will be blurred, and
be shown slightly shifted when highlighted.
• The aspect ratio of the picture may differ from
the original aspect ratio.
• The picture movement is not smooth.
Selecting the Color System
UX-QD9[US].book 6 ページ ２００４年１０月８日 金曜日 午前１０時２７分