Filter
Top Products
Listening to radio broadcasts
18
2 Press [TUNING ] or [TUNING ]
repeatedly to select a radio station
(frequency).
• When the main unit has received an FM ste-
reo broadcast, the “ST” (stereo) indicator
lights up in the display window.
■Automatic tuning:
You can also select a radio station using auto-
matic tuning.
Hold down [TUNING ] or [TUNING ] until
the frequency starts changing, and then
release the button.
• When the main unit has received a broad-
cast, the frequency automatically stops
changing.
• You can select a specific radio station while
searching for a broadcast. Press [TUN-
ING ] or [TUNING ] to stop automatic
tuning when the desired frequency appears
in the display window.
NOTE
• If an FM stereo broadcast is difficult to hear
because of noise, you may be able to hear the
broadcast more easily by pressing [FM MODE]
to switch the sound to monaural reception. In
this case, the “MONO” (monaural) indicator
lights up in the display window. To return the
sound to stereo reception, press [FM MODE]
again. “AUTO” is displayed and the “ST” (stereo)
indicator lights up in the display window.
Presetting radio stations in the main unit allows
you to easily tune in to a radio station.
You can store up to 30 FM radio stations and up to
15 AM radio stations.
1 Select a radio station you want to
store.
• Refer to “Selecting a radio station” on page
17.
2 Press [ENTER].
•“
--
” flashes in the display window for
approximately 5 seconds.
3 While “
--
” is flashing, press the
number buttons to select the pre-
set number you want to assign.
• You can also select the preset number by
pressing [PRESET ] or [PRESET ].
4 Press [ENTER] while the selected
number is flashing.
• “STORED” appears and the selected radio
station is stored.
NOTE
• When you store a radio station to a preset num-
ber to which another radio station has previously
been stored, the newly set radio station replaces
the previously stored radio station.
■When an FM or AM radio broadcast is
selected as the source
Press the number buttons to select
the preset number of the radio station
to which you want to tune in.
• You can also select the preset number by press-
ing [PRESET ] or [PRESET ].
Tuning in to a preset radio
station
Presetting radio stations
Tuning in to a preset radio station
NX-F3_NX-F7[US].book Page 18 Friday, February 15, 2008 4:50 PM