JVC CA-MXSK3 Stereo System User Manual


 
– 30 –
English
SLEEP10 SLEEP60SLEEP30SLEEP20
SLEEP120 SLEEP90
Using Sleep Timer
With Sleep Timer, you can fall asleep to music. You can set
Sleep Timer only while the unit is turned on.
How Sleep Timer actually works
The unit automatically turns off after the specified time
length passes.
On the remote control ONLY:
1
Press SLEEP.
The time length until the shut-off time appears
and the SLEEP indicator lights up on the display.
Each time you press the button, the time length
changes as follows:
2
Wait for about 5 seconds after specifying the
time length.
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time until the shut-off time
appears for about 5 seconds.
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly so that the
SLEEP indicator goes off.
Sleep Timer is also cancelled when you turn off the unit.
SLEEP
If you set the Sleep Timer after the Daily Timer starts playing
the selected source
The Daily Timer is cancelled. When the Sleep Timer shut-off time
comes, the unit will turned off.
If you set the Sleep Timer after the recording Timer starts
recording
The Recording Timer is cancelled, but recording continues until
the Sleep Timer shuts off the power.
If the unit is turned on when on-time comes
Timer does not work.
When you unplug the power cord or if a power failure occurs
The timer will be cancelled. You need to set the clock first, then
the timer again.
Cancelled