Filter
Top Products
English
– 28 –
4
Set the turn-on-time.
1) Press 4 or ¢ to set the hour,
then press SET.
2) Press 4 or ¢ to set the minute,
then press SET.
“OFF TIME” appears for 2 seconds, then
the unit enters turn-off-time setting mode.
5
Set the turn-off-time.
1) Press 4 or ¢ to set the hour, then
press SET.
2) Press 4 or ¢ to set the minute,
then press SET.
The unit enters preset station selecting
mode.
6
Select the preset station.
1) Press 4 or ¢ to select the band
(“TUNER FM” or “TUNER AM”),
then press SET.
2) Press 4 or ¢ to select a preset channel
number, then press SET.
The REC (Recording Timer) indicator stops
flashing and remains lit. The settings you
have entered are shown on the display in sequence.
7
Press to turn off the unit (on
standby) if necessary.
If you want to listen to another source
while recording
Press REC START/STOP to stop recording. Without stopping it, you
cannot change the source.
To turn on or off Recording Timer after it is set
1 Press CLOCK/TIMER repeatedly until
“REC” appears on the display.
2 To turn off the Recording Timer, press
CANCEL.
The REC (Recording Timer) indicator goes off
from the display.
The Recording Timer is canceled, but the
setting for the Recording Timer remains in memory.
To turn on the Recording Timer, press SET.
The REC (Recording Timer) indicator lights
up on the display. The settings you have
entered are shown on the display in sequence
for your confirmation.
NEXT
PREV
NEXT
PREV
NEXT
PREV
Using Sleep Timer
With Sleep Timer, you can fall asleep to music.
You can set Sleep Timer when the unit is turned on.
How Sleep Timer works
The unit automatically turns off after the specified time
length elapses.
On the remote control ONLY:
1
Press SLEEP.
The time length until shut-off appears and the
SLEEP indicator starts flashing on the display.
• Each time you press the button, the time length changes
as follows:
2
Wait for about 5 seconds after specifying the
time length.
The SLEEP indicator stops flashing and remains lit.
To check the remaining time until shut-off, press SLEEP
once so that the remaining time until shut-off appears for
about 5 seconds.
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly so that the
SLEEP indicator goes off.
• Sleep Timer is also canceled when you turn off the unit.
Timer Priority
Since each timer can be set separately, you may wonder what
happens if the setting for these timers overlaps.
Here are examples.
• Recording Timer has priority over Daily Timer and
Sleep Timer.
If Daily Timer is set to come on while Recording Timer is
operating, Daily Timer will not come on at all.
If Recording Timer is set to come on while Sleep Timer is
operating, Sleep Timer will not work (the SLEEP indicator
does not go off).
10
Canceled
20
30 60 90 120
6:00 7:307:006:30
Recording Timer
Daily Timer
7:00
6:30
Recording Timer
7:30
6:00
does not work.
Sleep Timer
does not work.
EN21-26.MX-J770[U]/3 16/06/2000, 9:37 AM28