Filter
Top Products
– 18 –
English
Using the Timers
There are three timers available — Recording Timer, Daily
Timer, and Sleep Timer.
Before using the timers, you need to set the clock built in the
unit. (See page 9.)
Using Daily Timer
With Daily Timer, you can wake to your favorite music or
radio program.
How Daily Timer actually works
The unit automatically turns on, set the volume level to the
preset level, and starts playing the specified source when the
on-time comes. Then, when the off-time comes, the unit
automatically turns off (stands by).
The timer setting remains in memory until you change it.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
• If you have made a mistake while setting timer, press
CLOCK/TIMER twice and start from step 1 again.
On the unit ONLY:
1
Press CLOCK/TIMER until “
TIMER” appears on the display.
The indicator also starts flashing on the
display.
• Each time you press the button, the timer setting modes
change as follows:
2
Press PROGRAM/SET.
“ON TIME” appears for 2 seconds, then
the unit enters on-time setting mode.
3
Set the on-time you want the unit to turn on.
1) Press 4 or ¢ to set the hour,
then press PROGRAM/SET.
2) Press 4 or ¢ to set the
minute, then press PROGRAM/
SET.
“OFF TIME” appears for 2 seconds,
then the unit enters off-time setting
mode.
4
Set the off-time you want the
unit to turn off (on standby).
1) Press 4 or ¢ to set the hour,
then press PROGRAM/SET.
2) Press 4 or ¢ to set the
minute, then press PROGRAM/
SET.
The unit enters the volume setting mode.
5
Set the volume level when
the unit is turned on.
Press 4 or ¢ to set the volume,
then press PROGRAM/SET.
The unit enters source selecting mode.
6
Press 4 or ¢ to select the
source to play, then press PROGRAM/SET.
• Each time you press 4 or ¢, the source changes as
follows:
FM: tunes into a specified preset FM station. = go to
step 7.
MW: tunes into a specified preset MW station. = go to
step 7.
LW: tunes into a specified preset LW station. = go to
step 7.
CD: plays a disc from the first track. = go to step 8.
• Make sure there is a CD on the currently selected
disc number tray.
TAPE:plays a tape in deck A or B. = go to step 8.
• Make sure that a tape is in the deck whose deck
indicator (A or B) is lit on the display.
• Make sure that the tape direction is correct.
Continued
PROGRAM/SET
TIMER
CLOCK
Clock time
REC
PROGRAM/SET
PROGRAM/SET
PROGRAM/SET
CLOCK
/TIMER
CD
FM
MW
TAPE
LW
EN17-24.CA-MXJ150R[E]/f 00.5.22, 2:28 PM18