JVC CA-MXJ150R Stereo System User Manual


 
– 13 –
English
Switching to a Traffic Announcement
Temporarily
By receiving EON data sent by FM RDS stations, the EON
function allows the unit to switch temporarily to a broadcast
of a traffic announcement from a different station.
The EON function only works when you are listening to a
preset FM RDS stations providing EON data.
The EON indicator lights while receiving a station with
EON data.
To activate the EON function
REMEMBER you must preset FM RDS stations to use the
EON function. If not yet done, see page 11.
1
Press and hold PTY/EON .
Each time you press and hold PTY/EON, “TA
ON” and “TA OFF” alternately appear
on the display.
TA ON: Switches to a traffic announcement, if any.
TA OFF: This function is canceled.
How the EON function actually works:
CASE 1
If there is no station broadcasting a traffic
announcement
The unit continues tuning in the current station.
«
When a station starts broadcasting a traffic announcement,
the unit automatically switches to the station. The TA
indicator starts flashing.
«
When the program is over, the unit goes back to the
previously tuned station, but the EON function still
remains activated.
CASE 2
If there is a station broadcasting a traffic
announcement
The unit tunes in the program. The TA indicator starts
flashing.
«
When the program is over, the unit goes back to the
previously tuned station, but the EON function still
remains activated.
CASE 3
If the FM station you are listening to is broadcasting a
traffic announcement
The unit continues to receive the station but the TA
indicator starts flashing.
«
When the program is over, the TA indicator goes off, but
the EON function still remains activated.
More about the EON function
EON data sent from some stations may not be compatible with
this unit. In this case, the EON function may not work correctly.
While listening to a program tuned in by the EON function, the
station does not change even if another network station starts
broadcasting a program of the same EON data.
The EON function is canceled when you change the source to CD,
TAPE, or AUX, while it is temporarily canceled when you change
the source to AM.
PTY
/EON
TA OFFTA ON
EN01-13.CA-MXJ150R[E]/f 00.5.22, 2:26 PM13