– 16 –
Playing Back the Entire Discs
— Continuous Play
1
Load CDs.
2
Press one of the disc number
buttons (CD1, CD2, and
CD3) for the disc you want to
play.
CD play starts from the first track of
the selected disc and the disc number lamp starts flashing.
• Pressing CD 3/8 instead of the disc number buttons
starts playing back if a CD is on the trays.
• If no CD is placed on the selected disc tray, “NO DISC”
appears on the display.
To stop playing, press 7.
To remove the disc, press 0 for the corresponding disc tray.
CD playback sequence
When 3 CDs* are loaded on the disc trays, they are played in one of
the following sequences.
• When CD1 is pressed: CD1 ] CD2 ] CD3 (then stops)
• When CD2 is pressed: CD2 ] CD3 ] CD1 (then stops)
• When CD3 is pressed: CD3 ] CD1 ] CD2 (then stops)
* When only 2 CDs are loaded, they are played in the same order,
but the disc tray without a CD is skipped.
Track number
Elapsed playing time
Tracks of the currently playing disc
(Track numbers exceeding 16 are not displayed.)
Basic CD Operations
While playing a CD, you can do the following operations.
To exchange CDs during playback of another
Press 0 corresponding to a CD, not playing or selected
currently, to eject and exchange the CD.
If you exchange CDs during play, the current play will not
stop until all CDs you have exchanged are played.
To stop play for a moment
Press CD 3¥8.
While pausing, the elapsed playing time
flashes on the display.
To resume playing, press CD 3¥8.
To go to another track
Turn 4 / ¢ before or during
playback (or press 4 / ¢ on the
remote control).
• 4: Goes back to the beginning of
the current or previous tracks.
• ¢: Skips to the beginning of the
next or succeeding tracks.
If you turn 4 / ¢ (or press 4 / ¢ on the remote
control) before playing
You can change the tracks continuously.
To locate a particular point in a track
During play, press and hold 1 or ¡
(or 4 / ¢ on the remote control).
• 1 (or 4): Fast reverses the disc.
• ¡ (or ¢): Fast forwards the disc.
To go to another track directly using the number
buttons
Pressing the number button(s) on the remote control before or
during play allows you to start playing the track number you
want.
Ex.: For track number 5, press 5.
For track number 15, press +10,
then 5.
For track number 20, press +10,
then 10.
For track number 32, press +10,
+10, +10, then 2.
Continued
EN15-19.CA-MXGT91R&G71R[B]f 2/26/01, 6:58 PM16