JVC CA-MXGT91R Stereo System User Manual


 
– 13 –
Receiving FM Stations with RDS
RDS (Radio Data System) allows FM stations to send an
additional signal along with their regular program signals.
For example, the stations send their station names, as well as
information about what type of program they broadcast, such
as sports or music, etc.
When tuned to an FM station which provides the RDS
service, the RDS indicator lights up on the display.
With the unit, you can receive the following types of RDS
signals.
PS (Program Service):
Shows commonly known station names.
PTY (Program Type):
Shows types of broadcast programs.
RT (Radio Text):
Shows text messages the station sends.
EON (Enhanced Other Networks):
Provides the information about the types of the
programs sent by other RDS stations.
More about RDS
Some FM stations do not provide RDS signals.
RDS services vary among FM RDS stations. For details on RDS
services in your area, check with local radio stations.
RDS may not work correctly if the received station is not
transmitting the signals properly or if the signal strength is weak.
Changing the RDS Information
You can see RDS information on the display while listening
to an FM station.
Press DISPLAY MODE.
Each time you press the button, the display
changes to show the following information:
If no PS, PTY, or RT signals are sent by a station
“NO PS,” “NO PTY,” or “NO RT” appears in the main display.
If the unit takes time to show the RDS information received
from a station
“WAIT PS,” “WAIT PTY,” or “WAIT RT” may appear on the
display.
Searching for Programs by PTY Codes (PTY
Search)
One of the advantages of RDS is that you can locate a
particular kind of program by specifying the PTY codes.
For details on the PTY codes, see “Additional Information”
on page 27.
To search for a program using the PTY codes
REMEMBER you must preset FM RDS stations to use the
PTY codes. If not yet done, see page 12.
There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
1
Press PTY/EON until “PTY” and
“SELECT” alternately appear on
the display.
Each time you press the button, RDS operation mode
changes as follows:
2
Press SELECT + or SELECT –
until the PTY code you want
appears on the display.
Each time you press the button, the PTY codes change
as follows:
NEWS AFFAIRS INFO SPORT
EDUCATE DRAMA CULTURE
SCIENCE VARIED POP M ROCK M
M.O.R. M LIGHT M CLASSICS
OTHER M WEATHER FINANCE
CHILDREN SOCIAL A RELIGION
PHONE IN TRAVEL LEISURE JAZZ
COUNTRY NATIONAL OLDIES
FOLK M DOCUMENT
(back to the beginning)
3
Press PTY/EON once again.
While searching, “SEARCH” and the
selected PTY code alternate on the display.
The unit searches 30 preset FM stations,
stops when it finds the one you have selected (“FOUND”
appears), and tunes in that station.
If no program is found, “NOT” and “FOUND” appear
on the display and the unit returns to the last received
station.
To stop searching any time during the process
Press PTY/EON while searching.
PS
(Program Service)
PTY
(Program Type)
RT
(Radio Text)
Station frequency
(or preset channel no.)
PTY SELECT EON SELECT
(See page 14.)
Canceled
EN01-14.CA-MXGT91R&G71R[B]f 2/26/01, 6:57 PM13