Filter
Top Products
47
Additional Information
Learning More about This System
Before Operating the System
(see pages 8 to 11)
Playable Disc Types:
• About audio format
–
Linear PCM:
Uncompressed digital audio, the same
format used for CDs and most studio masters.
–
Dolby Digital:
Compressed digital audio, developed by
Dolby Laboratories, which enables multi-channel
encode to create the realistic surround sound.
–
DTS (Digital Theater Systems):
Compressed digital
audio, developed by Digital Theater Systems, Inc.,
which enables multi-channel like Dolby Digital. As the
compression ratio is lower than for Dolby Digital, it
provides wider dynamic range and better separation.
– When playing back a DVD Audio disc recorded by MLP
(Meridian Lossless Packing; a lossless audio
compression system that can completely recreate the
PCM signal), the signals recognized as the linear PCM
signal, however, no indicator lights up in the display
window.
Daily Operations—Playback
(see pages 12 to 16)
Listening to the Radio:
• If you store a new station into an occupied preset number,
the previously stored station in that number will be erased.
• When you unplug the AC power cord or if a power failure
occurs, the preset stations will be erased in a few days. If
this happens, preset the stations again.
Playing Back a Disc:
• On some DVD, SVCD, or VCD discs, the actual
operations may be different from what is explained in this
manual, due to the programming and disc structure; such
differences are not a malfunction of this System.
• Some DVD Audios prohibit downmix. When you play
back such a disc, “LR ONLY” appears on the display and
the System plays back the left front and right front signals.
• For MP3/WMA/JPEG playback...
– MP3/WMA/JPEG discs are required a longer readout
time than regular CDs. (It depends on the complexity of
the group/file configuration.)
– Some MP3/WMA/JPEG files cannot be played back and
will be skipped. This results from their recording
processes and conditions.
– When making MP3/WMA discs, use ISO 9660 Level 1
or Level 2 for the disc format.
– This system can play back MP3/WMA/JPEG files with
the extension code <.mp3>, <.wma> or <.jpg>
(regardless of the letter case—upper/lower).
– It is recommended that you make each MP3/WMA file
at a sampling rate of 44.1 kHz and at bit rate of 128 kbps.
This System cannot play back files made at bit rate of
less than 64 kbps.
• When discs* in more than one tray are loaded on the disc
trays, they are played in sequence as follows:
Ex.:When DISC 2 is pressed:
DISC 2]
DISC 3]
DISC 4]
DISC 5]
DISC 1
(then stops)
* When no disc is loaded on the tray, that disc number is
skipped.
Daily Operations—Sound&Other Adjustments
(see pages 17 to 21)
Adjusting the Volume:
• Be sure to turn down the volume before connecting or
putting the headphones.
Reinforcing the Bass Sound:
• RHYTHM AX function also affects the sound through the
headphones.
• While listening with the headphones, you cannot adjust the
subwoofer level.
• RHYTHM AX function and subwoofer level setting does
not affect recording.
• You can adjust the subwoofer level while RHYTHM AX
is on.
• The subwoofer lamp changes brightness according to the
subwoofer level.
Selecting the Sound Modes:
• The sound mode lamp and Surround mode lamp change
brightness according to selecting Sound mode.
Creating Your Own Sound Modes—User Mode:
• When you unplug the AC power cord or if a power failure
occurs, the USER mode settings will be erased in a few
days. If this happens, set the USER Modes again.
Selecting 3D PHONIC Mode:
• While you use the headphones, 3D PHONIC mode is
canceled temporary.
• 3D PHONIC setting is also applied to the optical digital
output signals through the OPTICAL DIGITAL OUTPUT
terminal.
Changing the Scanning Mode:
• To enjoy the progressive video picture, connect a TV with
the progressive video input using component video cord.
• Do not change the progressive scanning mode in the
following cases:
– When your TV does not support the progressive video
input.
– When you have not connected your TV to the unit using
a component video cord.
Changing the Picture Tone:
• If no operation is done for about 10 seconds, the VFP
setting screen disappears.
HX-GD8.book Page 47 Friday, March 19, 2004 11:27 AM