Filter
Top Products
33
5 Finish the setting.
To cancel Repeat Play,
select “OFF” in step
4
.
To erase the on-screen bar
A-B Repeat
1 While playing, display the on-screen bar with the pull-
down menu.
2 Select .
3 Display the pop-up window.
4 Select “A-B”.
5 Select the start point (A).
6 Select the end point (B).
Time Search
You can move to a particular point by specifying the elapsed
playing time from the beginning.
1 While playing (without PBC for SVCD/VCD), display
the on-screen bar with the pull-down menu.
• Except for DVD: Time Search can be used before
starting playback.
2 Select .
3 Display the pop-up window.
4 Enter the time.
You can specify the time in hours/minutes/seconds.
•
It is always required to enter the hour digit (even “0”
hour), but it is not required to enter trailing zeros (the
last two digits in the examples above).
•
To correct a misentry,
press cursor 2
to erase the last
entry.
5 Finish the setting.
To erase the on-screen bar
Pop-up window goes off.
A-B Repeat starts. The selected
portion plays repeatedly.
Before pressing ENTER, you can
search for the end point using ¡
.
OFF
OFF
1/3
1/3 1/3
TIME
TITLE
14
TOTAL
1:25:58
CHAP
23
DVD-VIDEO
TITLE 2
TIME OFF CHAP. 1/31/ 3 1/1
TOTAL 1:01:58
CHAP 3
8.5Mbps
OFF
DISC 2
OFF
1/3
1/3 1/3
TIME
TITLE
14
TOTAL
1:25:58
CHAP
23
DVD-VIDEO
TITLE 2
TIME OFF CHAP. 1/31/ 3 1/1
TOTAL 1:01:58
CHAP 3
8.5Mbps
A–B
DISC 2
OFF
1/3
TIME
TITLE
14
C
H
DVD-VIDEO
TITLE 2
TIME A- CHAP. 1/3
C
8.5Mbps
DISC 2
Examples:
To move to a point of 1 (hours):
02 (minutes): 00 (seconds), press
1, 0, 2, 0, then 0.
To move to a point of 54
(minutes): 00 (seconds), press 0,
5, 4, 0, then 0.
The System starts playing from
the specified time.
OFF
1/3
1/3 1/3
TIME
TITLE
14
TOTAL
1:25:58
CHAP
23
DVD-VIDEO
TITLE 2
TIME OFF CHAP. 1/31/ 3 1/1
TOTAL 1:01:58
CHAP 3
8.5Mbps
TIME _ : _ _ : _ _
DISC 2
HX-GD8.book Page 33 Friday, March 19, 2004 11:27 AM