Filter
Top Products
31
Recording onto a Tape
You can use type I tapes for recording.
• To play a tape, see page 12.
1 Insert a recordable cassette into deck B.
2 Check the tape running direction and Reverse Mode
settings on the display.
To change the direction
Change the Reverse Mode if necessary
3 Start playing the source—“TUNER FM,”
“TUNER AM,” “DVD/CD,” “USB,” “TAPE-A” or
“AUX.”
• When recording from a disc/USB mass storage class
device, you can also use “Synchronized Recording”
(see page 32).
• When recording from deck A, you can also use
“Dubbing” (see “Dubbing Tapes” on the right column).
4 Start recording.
To stop recording
Dubbing Tapes
You can record a tape from deck A to deck B.
1 Change the source to “TAPE”.
2 Insert the source cassette in deck A, and a recordable
cassette in deck B.
3 Check the tape running direction and Reverse Mode
settings on the display.
See step 2 of “Recording onto a Tape” on the left column.
4 Start dubbing.
• When either tape playback or recording ends, both cassette
decks stop at the same time.
To stop dubbing
Push Insert Close
()
To record on both sides.
•
When using Reverse Mode, start
recording in the forward (
3) direction.
To record on only one side.
INFO
Tape direction indicator
Reverse Mode indicator
Current source
(
forward
)
(
reverse
)
3
2
REVERSE
MODE
Remote
ONLY
or
Main Unit
ONLY
DX-U20_9[U].book Page 31 Wednesday, March 4, 2009 10:59 AM