JVC CA-D752TR Stereo System User Manual


 
5
English
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting the Speakers
Refer to instructions for speakers as well when you connect speakers.
For each speaker, connect one end of the speaker wires to the speaker terminals on the back of the System.
1. Open each of the terminals and insert the speaker wires firmly, then close the terminals.
2. Connect the red (+) and black (–) terminals of the right side speaker to the red (+) and black (–)
terminals marked RIGHT on the System.
Connect the red (+) and black (–) terminals of the left side speaker to the red (+) and black (–)
terminals marked LEFT on the System.
IMPORTANT: Use speakers with the correct impedance only.
The correct impedance is indicated on the back panel.
CAUTION: If a TV is installed near the speakers, the TV may display
irregular colours. In this case, set the speakers away from the TV.
Right Speaker
Left Speaker
Connecting the Optional Speakers
Connect the optional centre speaker and rear speakers.
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
CENTRE
SPEAKER
LEFT
RIGHT
CENTER
REAR
SPEAKERS
RIGHT LEFT
FRONT
+
+
EN.CA-D752TR[E]/F 23/4/98, 2:41 pm5