Filter
Top Products
29
English
The Cassette Deck allows you to play, record and dub audio tapes.
With Automatic Tape Detection, you can listen to Type I or II tapes without changing any settings.
The use of tapes longer than 120 minutes is not recommended, since characteristic deterioration may
occur and these tapes easily jam in the pinch-rollers and the capstans.
Entering the TAPE Operation Mode with the Remote Control
Pressing TAPE CONTROL makes the Remote Control ready for the Cassette Deck operations.
Operate the Cassette Deck with 3, 7 and MULTI CONTROL.
The explanation provided in “Using the Cassette Deck” section assumes that the Remote Control has been
put into Cassette Deck operation mode. When you use the Remote Control, press TAPE CONTROL first.
Using the Cassette Deck
(Playing)
DISC
DISC
DISC
PROGRAM
/RANDOM
REPEAT
EDIT
MULTI CONTROL
7 STOP
TAPE ™ £
When TAPE is selected
as the source, the button
lights up.
REVERSE MODE
DECK A/B
0 Eject (Deck B)
0 Eject (Deck A)
FM
AM
RM-SED752TRU REMOTE CONTROL
VOLUME
+
–
TAPE A
AUX
REC PAUSE
TAPE B
DIRECTION
REPEAT
SLEEP
SHIFT
PTY/EON
TEST TONE
CENTER MODE
DELAY TIME
L BALANCE R
CENTER
LEVEL
3CH LOGICPRO LOGIC
DISPLAY MODE
– SELECT +
S.A.BASS
SOUND
MODE
RDS
CONTROL
DISC 1
CD
CONTROL
TAPE
CONTROL
DISC 2 DISC 3
FM MODE
–+
REAR
LEVEL
–+
Cassette Deck
control buttons
Display
: Tape Direction indicator
: DECK A, B indicator
: Reverse Mode indicator
When the System is being used, the display shows other items
as well. However, we have only shown the items described in
this section.
Tape Direction Indicator on the Display
The Tape Direction indicator tells you which direction the
selected tape deck will use for playback.
During playback, the direction indicator flashes slowly.
During fast left or fast right, the indicator flashes quickly.
During Music Scan mode, the indicator flashes slowly and
quickly alternately.
MULTI CONTROL
TAPE
CONTROL
Pressing TAPE CONTROL
makes the Remote Control
ready for the Cassette Deck
operations.
EN.CA-D752TR[E]/F 23/4/98, 2:41 pm29