Filter
Top Products
22
English
Using the Cassette Deck
(Listening to a Tape)
Cassette Deck
control buttons
kHz
MHz
CONT.
ALL PRGM
REC
A.BASS EX S.MODE
SLEEP MONOSTCLOCK
RANDOM
TANEWS INFO
EON
Display
: Tape Direction indicator
: DECK A, B indicator
: Reverse Mode indicator
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
Tape Direction Indicator on the Display
The Tape Direction indicator tells you which direction the selected
tape deck will use for playback.
During playback, the direction indicator blinks slowly.
During fast left or fast right, the indicator blinks quickly.
During Music Scan mode, the direction indicator alternates between
blinking slowly and quickly repeatedly.
The Cassette Deck allows you to play, record and dub audio tapes.
o With Automatic Tape Detection, you can listen to Type I or II tapes without changing any settings.
The use of tapes longer than 120 minutes is not recommended, since characteristic deterioration may
occur and these tapes easily jam in the pinch-rollers and the capstans.
One Touch Play ——————————————————————
By pressing the TAPE ™£ button (or the ™ or £ button on the Remote Control), the Unit will turn
on, “TAPE” appears on the display, and if a tape is in the deck, it will start to play. If no tape is loaded, the
Unit will turn on and wait for you to insert a tape, or select another function.
Regular Play
When the power is already on, you can use this basic procedure:
1. Press the 0 button for the deck you want to use.
2. When the cassette holder opens, put a cassette in, with the
exposed part of the tape down, toward the base of the System.
• If the cassette holder does not open, turn the power off, then back on and press the 0 button again.
DISC
DISC
DISC
REPEAT
RANDOM
CONTINUE
MULTI CONTROL
7 STOP
TAPE ™£
When TAPE is selected
as the source, the button
lights up.
REVERSE MODE
DECK A/B
0 Eject (Deck B)
0 Eject (Deck A)
• This illustration is of CA-
D352TR. CA-D302T does
not have the DISPLAY
MODE, PTY/EON, and
SELECT –, + buttons.
This illustration shows
the Remote Control for
CA-D352TR. The
Remote Control for
CA-D302T does not
print the PTY/EON
and DISPLAY MODE
labels.
CA-D302/352TR[E]/EN 98.2.13, 9:57 PM22