JVC CA-D302T Stereo System User Manual


 
15
English
When this Unit carries out EON Standby reception, the indication will
change as follows:
1. Waiting for EON Standby reception.
2. Preset stations are being searched for and while
preparing to change the station, sound will be
muted.
3. The station will be changed and the Station
name being received will appear on the display.
When using the DISPLAY MODE button to change the display, use the appropriate setting for the
type of display.
Notes:
EON broadcasts of some stations may not be compatible with this Unit. In the case of an incompatible
EON broadcast, “EON” will not appear on the display.
If the reception is unsatisfactory for a station among the preset stations, the station is searched for
again. If after searching through the channels, the broadcasting station cannot be found,
“NOTFOUND” is displayed alternately on the display. The Unit will return to the station to which it
was previously tuned.
When broadcasting of the desired information has been completed, the Unit will automatically go back to
the station which had previously been tuned to.
While receiving information on EON Standby reception, the station will not change to other stations
even if the same information is available from them.
If the information you are waiting for is available from the current station, the indicator will blink.
ALARM function ——————————————————————
If an ALARM (Emergency) signal is received while receiving an EON code from a station, the Unit
automatically switches to the station broadcasting the ALARM signal.
MHz
CONT.
ALL PRGM REC
A.BASS EX S.MODE
SLEEP MONOSTCLOCK
RANDOM
TA NEWS INFO
EON
MHz
CONT.
ALL PRGM REC
A.BASS EX S.MODE
SLEEP MONOSTCLOCK
RANDOM
TA NEWS INFO
EON
Light up
MHz
CONT.
ALL PRGM REC
A.BASS EX S.MODE
SLEEP MONOSTCLOCK
RANDOM
TA NEWS INFO
EON
Station name
Blinking
CA-D302/352TR[E]/EN 98.2.13, 9:57 PM15