Filter
Top Products
27
Dubbing Tapes
1
Change the source to TAPE.
2
Insert the source cassette in deck A, and a recordable
cassette in deck B.
3
Start dubbing.
• When either tape playback or recording ends, both cassette
decks stop at the same time.
To stop dubbing
Synchronized Disc Recording
You can start and stop both disc play and tape recording at
the same time.
1
Load a disc and insert a recordable cassette in deck B.
• If the current playing source is not the disc player, press
DVD/CD 3
, then 7
.
For recording desired tracks from discs:
You can program tracks to record with your preferred
order.
• Select Program Play (and make a program: see page 18)
without starting playback.
2
Start recording.
The System automatically creates a 4-second blank between
the tunes recorded on the tape.
• When either disc play or recording ends, both disc player
and the cassette deck stop at the same time.
To record without creating a 4-second blank
1 Press DVD/CD 3
, then press 8
.
2 Press 4
to go back to the beginning of the track.
3 Press DISC REC to start recording.
Main Unit
ONLY
To protect your recording
Cassettes have two small tabs on the back to protect
from unexpected erasure or re-recording.
To protect your recording,
remove these tabs.
To re-record on a protected tape,
cover the holes with
adhesive tape.
INFO
Main Unit
ONLY
MX_DK5_3_1.book Page 27 Tuesday, February7, 2006 11:49 AM