JVC CA-HXZ1 Speaker System User Manual


 
– 15 –
English
Programming the Playing Order of the Tracks
—Program Play
You can arrange the playing order of the tracks before you
start playing. You can program up to 32 tracks.
To use Repeat Play (see page 17) for Program Play, press
REPEAT after starting Program Play. Only REPEAT 1 and
REPEAT ALL can be selected for Program Play.
There is a time limit in doing the following steps. If the setting
is canceled before you finish, start from step
2
again.
1
Load CDs.
If the current playing source is not the CD player, press
CD 3¥8, then 7 before going to the next step.
2
Activate the Program Play mode.
On the unit:
Press CD PLAY MODE repeatedly
until “CD PROGRAM” appears on
the display.
• Each time you press the button, the play
mode changes as follows:
On the remote control:
Press PROGRAM so that
“CD PROGRAM” appears
on the display.
If a program has been stored in memory, the program is
called up.
The PRGM (program) indicator also lights up on the
display.
3
Press one of the disc number
(CD1, CD2, and CD3) buttons
to select the disc you want to
play.
Track number
Disc number Program step number
4
Select a track from the selected
CD in the above step.
On the unit:
Turn 4 / ¢ to select the
track number and press
SET/DISPLAY.
On the remote control:
Press the number buttons.
For how to use the number
buttons, see “To go to another
track directly using the number
buttons” on page 14.
5
Program other tracks you want.
To program tracks from the same disc, repeat step
4
.
To program tracks from a different disc, repeat steps
3
and
4
.
6
Press CD 3¥8.
The tracks are played in the order you
have programed.
To stop playing, press 7.
To exit from Program Play mode, press CD PLAY MODE
repeatedly (or press PROGRAM on the remote control) until
the PRGM (program) indicator goes off. The program you
have made is stored in memory.
If you try to program a 33rd track
“CD FULL” will appears on the display.
If your entry is ignored
You have tried to program a track from an empty tray, or a track
number that does not exist on the CD (for example, selecting track
14 on a CD that only has 12 tracks). Such entries are ignored.
CD PLAY
MODE
SET /
DISPLAY
P
R
E
S
E
T
1
4
7
10
2
5
8
3
6
9
10
CD3
CD2
CD1
PROGRAM
CD
CD PROGRAM
Total track number and
total playing time (Continuous Play)
CD RANDOM
PRGM
PRGM
EN13-18.CA-HXZ1[UW]f.pm6 4/15/02, 7:07 PM15