JVC /CA-D451TR Stereo System User Manual


 
15
English
Notes:
EON broadcasts of some stations may not be compatible with this Unit. In the case of an incompatible
EON broadcast, “EON” will not appear on the display.
While the Unit is receiving information for an EON code you have selected for EON Standby, you
cannot use the following operations: 4 P. DOWN or ¢ P. UP button. In addition, if a station
transmits information for a programme type you have selected without sending the EON code, the
EON Standby operation is still performed. Therefore, you will not be able to use the operations listed
above during this period.
If the reception is unsatisfactory for a station among the preset stations, the station is searched for
again. If after searching through the channels, the broadcasting station cannot be found,
“NOTFOUND” is displayed alternately on the display. The Unit will return to the station to which it
was previously tuned.
When broadcasting of the desired information has been completed, the Unit will automatically go back to
the station which had previously been tuned to.
While receiving information on EON Standby reception, the station will not change to other stations
even if the same information is available from them.
If you cancel the EON function when in EON Standby reception mode, the Unit will automatically
return to the station which had been previously tuned-in.
If the information you are waiting for is available from the current station, the indicator will blink.
ALARM function ——————————————————————
If an ALARM (Emergency) signal is received while receiving an EON code from a station, the Unit
automatically switches to the station broadcasting the ALARM signal.
CA-D351/451TR[E]/EN 97.4.16, 9:39 AM15