Jensen JMC-326 CD Player User Manual


 
10
7. Repeat All:
When the REP/PRST Button is pressed twice, the Repeat All Indicator “REP. ALL” (D17) will be
shown in the LCD DISPLAY. The whole disc will be played continuously.
8. To cancel the repeat function, press the REP/PRST Button repeatedly until the Repeat Indicator
disappears from the LCD DISPLAY.
9. To stop the CD, press the STOP/BAND Button once no matter the CD is in Play or Pause mode.
The LCD DISPLAY will show the total number of tracks on the disc again.
10. Press the FUNCTION Button again to enter Disc 2 mode to play.
11. To turn off the unit, press the Button again. LCD backlight goes off.
PROGRAMMED PLAY
Programmed play can only be done under the following conditions:
i. In CD stop mode;
ii. Alarm function “Off” and
iii. Only one player can be programmed at a time.
1. In CD stop mode, briefly press the PROG/SET Button once. The Program No. “Cd:01” will light
up and “01” will change to “00” and blink along with the Program Indicator “PROG” (D18) to
prompt for input.
Note: The System will enter Alarm Setting mode if the PROG/SET Button is pressed and held for
more than one (1) second. If this happens, please press the STOP/BAND Button or the
PROG/SET Button once. The LCD Display reverts to CD mode.
2. Press the " or # Button to select your desired musical track.
3. When the desired track appears in LCD, press the PROG/SET Button to store it in memory. The
Program No. will change to “02” and revert to “00” and blink together with the Program Indicator
“PROG” (D18) to prompt for another input.
4. Repeat the above procedure until all your desired tracks have been programmed. You can
program up to 20 tracks in the program memory. If you attempt to program more than 20 tracks,
the Program No. will revert back to “Cd:01” and you will begin overwriting the first track programmed.
5. Press the Button once to start the program playback in your programmed sequence.
REPEAT PLAY MODE
6. Repeat 1:
When the REP/PRST Button is pressed once, the Repeat 1 Indicator “REP.1” (D16) will be
shown in the LCD DISPLAY. This single track of music will be played repeatedly.
7. Repeat All:
When the REP/PRST Button is pressed twice, the Repeat All Indicator “REP. ALL” (D17) will be
shown in the LCD DISPLAY. The whole disc will be played continuously.
8. To cancel the repeat function, press the REP/PRST Button repeatedly until the Repeat
Indicator disappears from the LCD DISPLAY.