Jensen JMC-1000 Stereo System User Manual


  Open as PDF
of 31
 
29
MS9903TT_ib080503.p65 5/8/2003, 11:4428
TROUBLESHOOTINGGUIDE
Symptom
Theunitdoesnot
respond(nopower)
AMbandistoonoisy
Radiopausedabout1
secondwhenswitch
fromphonographmode
totunermode
Soundisdistorted
CDPlayerdoesnot
play.
CDskipswhileplaying
Unitgetswarmafter
extendedplayathigh
volume
PossibleProblem
ACcordisnotplugged
intoawalloutlet
Walloutletisnot
functioning.
Thereceptionattheset
locationispoor.
Thisisnormal.
Solution
Plugthe ACcordintoawalloutlet.
Pluganotherdeviceintothesameoutlet
toconfirmtheoutletisworking.
Slightlyrotatetheunitforthebest
reception.
Radiowillresumenormalfunctionin
1~2seconds.
Decreasethevolume.
Tryadifferentaudiosourcesuchasa
musicCD.
ChangetheEQsetting.
SlidetheFUNCTIONswitchtoselect
CDmode.
PresstheCDontospindle,printedside
facingup.
Wipewithclothoranotherdisc.
Turntheunitoffforaperiodoftimeor
lowervolume.
Volumelevelissettoohigh
Soundsourceisdistorted.
CDmodeisnotselected
CDisnotinstalledor
installedincorrectly
Discisdirtyorscratched.
Thisisnormal.
 previous