Filter
Top Products
11
®
CM715K
Dodge/Chrysler/Plymouth
1. Note the position of brackets on the exist-
ing radio.
2. Match the brackets found in the hardware
kit to the mounting tabs on your factory
radio.
3. Attach the supplied brackets to the chassis
of the radio with the four "machine thread"
Phillips type screws. Use two screws for
each bracket.
Jeep Grand Cherokee, Dodge
Avenger, Plymouth Sebring
1. Note the position of brackets on the exist-
ing radio.
2. Match the brackets found in the hardware
kit to the mounting tabs on your factory
radio.
3. Attach the supplied brackets to the chassis
of the radio with the four "machine thread"
Phillips type screws. Use two screws for
each bracket.
Typical Bracket Location
RESET
RESET
Untitled-3 4/10/99, 7:38 PM11