Filter
Top Products
fast and sharp bass. The low frequency alignment feature enables placing the
speakers near or even in a corner without producing an over-abundance of
bass. This corner placement ability allows optimum performance even in
small rooms . Find the most suitable point by using various source materials.
The Project EVEREST DD66000 requires right or left speaker designation,
depending on installed locations. Once speaker locations are decide, please
refer to System Orientation in Chapter 8 Control Panel and set it up.
CAUTION: Project EVEREST DD66000 is a massive system comprised of
materials chosen for their density, with its weight concentrated in a relatively
narrow area. Verify the integrity of the floor surface before placing and setting
up the speakers. See Floor Requirements. Remember that these speakers
weigh close to 140 kg (308 lbs) each and cannot be easily moved once they are
installed.
Floor Requirements
The floor in the location selected for setting up the Project EVEREST DD66000
speakers must be capable of supporting a load of 140 kg (308 lbs). Because of
the coupling effect of the stainless steel feet, a flat, hard surface such as wood
or linoleum is preferable. However, the design of the loudspeaker's coupling
system, along with the speaker's extreme weight, should result in excellent
performance on any surface, even on carpets.
To prevent indentations on wood or linoleum floors caused by the weight of the
loudspeaker, always utilize the enclosed coasters. Do not set up the Project
EVEREST DD66000 system directly on a ceramic tile floor; the concentrated
weight might cause the tiles to crack.