Filter
Top Products
6
English
7
English
7
6
8
Call waiting and placing a call on hold*
This lets you put a call on hold during conversation to answer an incoming call.
•
Press
the answer/end button once to put the active call on hold and answer the
incoming call
•
Press
the answer/end button to switch between the two calls
•
Tap
the answer/end button to end the active conversation
Adjust sound and volume
Press the volume up or down (+ or -) to adjust the volume.
See fig 1.
*Phone dependent
How to Play music in stereo
When connected via Bluetooth to a stereo device your Jabra BT620s realizes its full
potential. The right hand side of your Jabra BT620s is dedicated for use when playing
music in stereo. These buttons will work when the device you have connected to is
able to support the Bluetooth remote control (AVRCP) profile – See glossary for more
information on this.
The prominent center button on the right side of the device is the Play button. On the
top there are the Skip forward and skip back buttons.
To start Play
Make sure your headset is connected in Advanced Audio profile
Tap
the Play button once
To Pause
Tap
the Play button – tap again to resume playing
To Stop
Long Press
the Play button
Answer a call when playing music
Tap
the Answer/end button and the music will be paused and the call will be connected.
The music will resume after the call has ended (dependent on your device supporting
this feature)
.
Skip one track forward
Tap
the Skip Forward button - continue tapping to skip several tracks forward
Skip one track back
Tap
the skip Back button - continue tapping to skip several tracks backward
5
Connecting with a second device
You are able to connect your BT620s with two devices, enabling music playing and
phone connectivity at the same time.
Refer to your PC/MP3 player/phone manual for details regarding pairing/connecting a
second device.
Wearing your Jabra BT620s
Your Jabra BT620s is designed to be comfortably worn with the neckband behind your
head. The microphone is integrated in the right earpiece and Digital Signal Processing
(DSP) is used for clear pickup of your voice.
How to….
Answer a call
Tap the answer/end button on your headset to answer a call when phone is ringing.
End a call
Tap the answer/end button to end an active call.
Reject a call*
Press the answer/end button when the phone rings to reject an incoming call.
Depending on your phone settings, the person who called you will either be forwarded
to voice mail or hear the busy signal.
Make a call
When you make a call from your mobile phone, the call will (subject to phone settings)
automatically be transferred to your headset when connected.
Activate voice dialing*
Tap the answer end button and speak the name. For best results, record the voice-dialing
tag when you are wearing the headset. Please consult your phone’s user manual for more
info on using this feature.
Redial last number*
Press the answer end button