Jabra BT100 Headphones User Manual


 
d) Receiving/ Answering a call
When wearing the headset - On and Linked:
A ring tone will sound in your headset,just press the headset’s MFB button to answer
the call.
If not wearing the headset – Off position (boom closed):
Open the headset’s boom to auto-answer the call through to the headset,then place
the headset on your ear in the normal wearing position.
e) Transferring a Call
Transferring a call from the headset to your phone:
Must be initiated by the phone (refer to the user guide that accompanied your phone).
Transferring a call from your phone to the headset:
Open the boom to activate the Auto-Transfer feature,
or
If boom is already open and the call is on the mobile phone,press the headset’s
MFB button.
4. Speak the voice tag name.
5. The phone automatically dials your selection,and you see the details of the call on
the phone screen.
6. When connected you are free to communicate normally.
(Please refer to the phone’s user guide for instructions on storing voice tags.Some
Mobile Phones need you to initiate voice dialing from the handset.)
b) Ending a call from the headset
To end a call when wearing the headset - press the headset’s MFB button.Also if you
remove the headset – the call can also be ended by closing the boom arm.
c) Disconnecting your Bluetooth link
To terminate the Bluetooth connection between the headset and your phone,turn
the headset Off (just close the boom).If you are on a call when the boom is closed,the
call will be held at the phone for up to 30 seconds while the user is prompted to
transfer the call back to the phone.Without a response by the user,the call will be
terminated after the 30 seconds.
16 17