Filter
Top Products
Using your JABRA BT100 Headset
a) Making a call with the headset
There are different ways to make a call using your JABRA BT100 headset.(In each case
you will need to make sure that you pair / link your headset and phone as described
on page 9.)
If your mobile phone supports voice dialing,you can use this feature in most cases
with the headset. Please refer to your phone’s user documentation for more
information on voice control and check whether your phone supports this feature.
Making a call from the Mobile Phone
1. Place the headset on your ear in the desired wearing style.
2. Using the phone’s keypad,dial the phone number.
3. To send the call,press the phone’s SEND / CALL key – the phone initiates the call.
Making a call Using Voice Dialing (Voice dialing on your phone must be turned On
and voice tags stored)
1. Place the headset in the desired wearing style.
2. On the Headset - Press the Multi Function Button. (MFB)
3. A tone prompts you to say the name of the person you wish to call (as entered in
the phone’s voicedial phonebook directory).
Speaker Volume & Volume Control Buttons
To increase the speaker (receive) volume,press and hold the
upper volume control button until the desired level is reached.
To decrease the speaker (receive) volume,press and hold the
lower volume control button until the desired level is reached.
An audible tone is played when either the minimum or
maximum volume has been achieved.
The headset is equipped with intelligent volume re-orientation
control so that it does not matter whether you are wearing the
headset on the left or right ear. When you change the earhook
from right to left wearing style - the top volume control button
will always increase the speaker volume and the bottom
volume control button will always decrease the speaker volume.
Microphone Mute
The JABRA BT100 has a mute,or call hold feature. To hold the call (mute the headset
microphone),press the volume up and the volume down buttons simultaneously.While
the headset microphone is muted,a double tone will be heard in the headset at a period
of every 3 seconds.To disable microphone mute,and return to normal headset operation,
simply depress both volume buttons momentarily again.(The double tone will stop)
14 15