Filter
Top Products
PREPARATION FOR USE
This carton contains the main unit, two speakers with removable front panels, and the remote
control handset.
Carefully remove all the components from the carton and remove all packing materials form the
components. Make sure nothing is accidentally discarded with the packing materials.
Save the carton and packing materials, if possible, in the unlikely event that this unit ever needs to
be returned for service. Using the original carton and packing material is the only way to properly
protect the unit from shipping damage.
Remove any descriptive stickers or labels from the front panel of the main unit. Do not remove any
labels or stickers that may be affixed to the back panel of the main unit or the speakers.
Unwind the AC power cord on the back of the main unit and extend it to its full length.
Unwind the FM lead wire antenna on the back of the main unit and extend it to its full length.
Unwind the speaker cables and connect the ends to the terminals on the the speakers and on the
main unit.
Unpacking and Set Up
7
8
Power Source
This system is designed to operate on 120V AC 60Hz house current only. Connecting this system to
any other power source may cause damage to the system and such damage is not covered by your
warranty.
NOTE: The system has polarized AC plug with one wide blade and one narrow blade. The plug will
only fit into matching polarized AC outlet.
This is a safety feature to reduce the possibility of electric
shock. If the plug will not fit in your AC outlets, your
probably have outdated non-polarized outlet. You should
have your outdated outlet changed by a qualified, licensed
electrician. Do not file the wide blade on the plug, or use an
adapter to make the plug fit into your outlet. This defeats the
safety feature and could expose you to electric shock.
AC Plug
AC Outlet
CONNECTION
Note: Always connect the speakers before switching the power ‘On’, and never
operate the system without the speakers properly connected.
The speaker cables and the speaker terminals are color-coded.
To make the connection, completely depress the plastic levers to open the terminals, insert the bare
end of speaker wire into the terminal openings, and release the plastic levers to lock the wires in place.
Connect one end of the wires to the main unit, the other to the speakers.
120V AC, 60 Hz
Connect the Gold wires to the Red terminals.
Connect the Silver wires to the Black terminals. If the wires are connected incorrectly the sound
will the “muddy” or distorted.
Connect the AC cord to the back of the unit
GOLD
SILVER