Filter
Top Products
37 38
RECORDING
M110 allows you to record music and audio content to the USB or SD/MMC card device in WMA
format. Files are stored on the flash device in a specially created folder named “AUDIO” and
sequentially named FILE000.WMA, FILE001.WMA etc.
Insert a USB device or SD/MMC card into the slot on the side of the main unit. If you attempt to
record without any media connected, display will show “NO MEDIA.”
Getting Started
Press the FUNCTION button to select TUNER mode.
Press the SELECT ID3/BIT RATE button on remote control.
Press the SKIP/TUNING buttons to select the rate you prefer. Options are:
Ensure that the device has spare capacity for recording.
Choose a recording bit rate. Bit rate or recording quality can be selected according to your
preference. Selecting a lower bit rate will create small recording files, therefore longer recording
time, at the expense of audio quality. Selecting a higher bit rate will create larger files with better
audio quality.
32KBPS
48KBPS
64KBPS
96KBPS
128KBPS
Press the SELECT ID3/BIT RATE button to confirm.
Insert a disc.
Press the FUNCTION button to select “CD” mode.
Select the track on the CD you wish to record.
Press the REC button once.
Recording from CD
Press REC again “CHECKING” will show on display. The unit checks
for sufficient space for the recording.
When track playback is complete, recording will stop and recording file is
created.
If sufficient space is available, “REC” and “USB” or “CARD” shows
flashing on the display and recording begins.
Press STOP/BAND or REC to cancel recording.
“USB”, “CARD” or both appear on the display.
If you have multiple media connected, use and to select
the media.
Recording from Tuner (FM Stereo only)
Press the FUNCTION to select “TUNER” mode.
Select your desired FM Stereo station.
Press the REC button once.
“USB”, “CARD” or both appear on the display.
If you have multiple media connected, use and to select
the media.
Press REC again.
“REC” and “USB” or “CARD” shows flashing on the display.
Recording begins.
Press the STOP/BAND button or REC to end recording.
Press the FUNCTION button to select iPod mode.
Start music playback on the iPod
Press the REC button once.
Recording from iPod
“USB”, “CARD” or both appear on the display.
If you have multiple media connected, use and to select
the media.
Press REC again.
“REC” and “USB” or “CARD” shows flashing on the display.
Recording begins.
Press the STOP/BAND button or REC to end recording.