3231
USB OPERATION
Playing MP3/WMA Audio Files On Portable USB Storage Device
Note: The USB port on this system enables playback of songs only in MP3 and WMA formats
(without DRM). It cannot play songs purchased from iTunes or other songs in AAC format, songs in
ATRAC format or songs purchased from ome online music retailers. It may be possible to convert
your music to one of the playable compressed formats, or burn it to an audio CD, depending on the
DRM restrictions. If you wish to play back songs that you have purchased from iTunes directly from
your iPod shuffle, please follow the instruction on page 10 for connecting the shuffle’s headphone
output jack to the system’s AUX IN inputs.
After reading the USB, the player will play automatically.
Press the FUNCTION button repeatedly until the main display
shows "USB".
Insert the USB flash containing MP3/ WMA audio files into the
USB port by gently pressing into position until it locks in place.
USB devices can only be inserted one way.
Press the PLAY/PAUSE button to pause playback.
Press SKIP TUNING or buttons to skip tracks.
Press PRESET/ALBUM/MENU + or – buttons to skip albums.
Press SELECT ID3/BIT RATE button to display title, album and artist information.
Playback will continue until the last track has played and then the display will again show the total
number of tracks, albums on the usb.
Press STOP/BAND button to stop playback at any time,
the display will show the total number of files (tracks) and
directories albums on the card. For example “02” albums,
“64” tracks.
iPod OPERATION
iPod Dock Adapter
NOTE: The adapter for iPod nano is already installed in the dock in the top of the system
This unit comes with 4 removable dock adapters to ensure the iPod fits properly in the dock on the
top of the system.
To place a dock adapter:
Refer to the compatibility table below and select the correct dock
adapter for the iPod. Using the correct adapter ensures the proper
fit for your iPod and helps to reduce the stress on the connector
when operating the iPod.
1.
2.
3.
Carefully align and then gently insert the iPod into the dock. (The
iPod must not be in a case or “skin”).
To remove/replace an dock adapter, first remove the iPod, then
grip the insert and pull gently upwards. Please refer to page 33.
Choosing the Correct Adapter
This unit supports playback of video from video-capable iPod models. You can view images and
video stored on your iPod on a TV using the iSymphony M110.
To play video from iPod:
3. Make sure the unit and TV are connected using an S-VIDEO or composite video connection.
4. Make sure the iPod is securely docked into the unit using the correct dock adapter.
5. Select iPod mode using FUNCTION button.
6. Play video on your iPod or start a slideshow. Video will play on your TV and audio through the
unit's speakers.
1. Refer to your iPod documentation to be sure it is video capable.
2. Ensure the video output on your iPod is turned on.
Video Settings TV out On
When connecting an iPod to this iPod Dock, please ensure that the correct adapter plate
is used. FAILURE TO DO SO MAY RESULT IN DAMAGE TO THE iPod.
!
Playing Video From iPod