ION RX-V750 Stereo Receiver User Manual


 
62
SET MENU
For COAXIAL INPUT jacks 5 and 6
Choices: TUNER (DSP-AX750SE), CD, V-AUX,
DTV/CBL, VCR 1, MD/CD-R, DVD, PHONO,
DVR/VCR2
You cannot select a specific item more than once for the same
type of jack.
When you connect a component to both the COAXIAL and
OPTICAL jacks, priority is given to the input signals from the
COAXIAL jack.
Input mode B)INPUT MODE
Use this feature to designate the input mode for sources
connected to the DIGITAL INPUT jacks when you turn on
this unit (see page 37 for details about the input mode).
Choices: AUTO, LAST
Select AUTO to allow this unit to automatically detect
the type of input signal and select the appropriate input
mode.
Select LAST to set this unit to automatically select the
last input mode used for that source.
Even if LAST is selected, the last setting for the EX/ES button
will not be recalled.
Input rename C)INPUT RENAME
Use this feature to change the name of the inputs on the
OSD and front panel display.
1 Press an input selector button to select the
input you want to change the name of.
2 Press AMP.
3 Press j / i to place the _ (under-bar) under
the space or the character you want to edit.
4 Press u / d to select the character you want,
then use j / i to move to the next space.
You can use up to 8 characters for each input.
•Press d to change the character in the following
order, or press u to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, #, *,
+, etc.
5 Repeat steps 1 through 4 to rename each
input.
6 To exit, press SET MENU when finished.
Notes
Note
.(5);;;;; CD
(CD)
(6);;;;; DVD
(DVD )

COAXIAL
IN
)AUTOLAST
[<]/[>]:Select
[SELECT]:Return

B)INPUT
MODE
DVD->DVD
[<]/[>]:Position
[]/[]:Chara.

C)INPUT
RENAME
p
p
01EN_00_RXV750_GB.book Page 62 Friday, March 5, 2004 11:40 AM